Release Fabrics

Release Fabric with Tracer

Nylon Release Fabric

 

Release Fabric
PV-30 Nylon Release Fabric

PRO-VAC Nylon Release Fabric is a 2.51 oz./yd2 heat set and scoured nylon 6,6 fabric with a maximum use temperature of 410˚F (210˚C). This peel ply is designed for composite processing, from hand lamination to infusion, with a red tracer to indicate fabric left behind on the laminate. When removed, the fabric leaves a textured finish that aids in secondary bonding on the part’s surface. PRO-VAC Nylon Release Fabric is not recommended for use with phenolic resins.

Sold in 100 m roll.

Download PV-30 Nylon Release Film Technical Data Sheet

 

 

 


Polyester Release Fabric

 

Release Fabric
PV-35 Polyester Release Fabric

PRO-VAC Polyester Release Fabric is a 2.51 oz./yd2 heat set and scoured polyester fabric with a maximum use temperature of 356˚F (180˚C). This peel ply is designed for composite processing, from hand lamination to infusion, with a red tracer to indicate fabric left behind on the laminate. When removed, the fabric leaves a textured finish that aids in secondary bonding on the part’s surface. PRO-VAC Polyester Release Fabric can be used with phenolic and non-phenolic resin systems.

Sold in 100 m roll.

Download PV-35 Polyester Release Film Technical Data Sheet